Probably the most useful tool that you’ll have in your workshop is miter saw. Miter saws are very much perfect for cutting lumber, especially crosscuts including a wide range of miter and compound miter (angle) cuts. A miter saw does not need to be very costly to still be a great tool. There are many budget priced options available that can meet your needs. Toolazine has a good review of the different miter saw options on common budget levels. Nevertheless, you have to remember that just like all power tools a miter saw may be extremely dangerous if it’s not used properly. The following guidelines will ensure you on how to use a miter saw appropriately.
Step 01: Dress Up Appropriately:
The first thing you need to dress up correctly. You are safe when you use a miter saw with a proper clothes. There are no difficult guidelines here, but two big points are to ensure that you are comfortable and that you haven’t any loose clothing that can get caught in the saw. It is particularly important when it comes to sleeves; you should not have baggy sleeves as they will generally be closest part to the saw. In most cases, they are the most suitable options.
Step 02: Wear Safety Glasses:
It is very much crucial to wear safety glasses when you are using the miter saw. Moreover, use the right type of electrical cords, and making sure the electrical power is sufficient for the device. Make sure you realize the tool’s requirements before the procedure as overloaded electric circuits may damage the saw or cause a fire in the workshop. Every miter saw brand is a little bit different from others. So you have to wear safety glasses just matching your miter saw.
Step 03: Don’t Remove Blade Guard:
Every miter saw comes with a blade guard and you should not remove or turn off it. Additionally, you desire to ensure that it doesn’t bind whenever you are reducing or increasing the saw. The blade can save you at the time of working.
Step 04: Install The Cutting Blade Properly:
The next step is that you have to install the best miter saw blade properly. It is also necessary to sharpen the blade as required. To ensure perfect cutting, you should avoid the blunt blade. Additionally, it is crucial to ensure that the saw blade is effectively mounted on the arbor. Normally it might arrive loose when you are making use of the saw and do all sorts of damage. If you are examining the blade or perhaps performing any other task on the saw, ensure that you unplug it first.
Step 05: Use the Fence:
At the time of using your best miter saw it is necessary to utilize it in the right way. The top factor is to ensure that you make use of the fences; it is there for a specific reason. The fence on the miter saw is there to help to contain the piece you are slicing in place, ensure that you utilize it. Trying to produce a cut freehand is harmful. It could lead to the piece you’re trimming getting elevated by the saw plus thrown back at you.
Step 06: Cutting Short Pieces Needs Special Approaches:
Whenever you are going to cut short pieces less than 8 inches long, you need to apply the special technique. To cut short pieces, you have to keep your fingertips in the safe area from the blade. If you want a 6 inches piece of baseboard with miters on the both ends, for instance, cut a single miter on the end of a lengthy piece of base. Then tag for the other miter. After selecting the miter saw position and cut off the 6 inches piece when you contain the longer end. So you should apply special approaches to cut the short piece.
Step 07: Clean the Saw Dust:
As you utilize the saw, it’ll gather plenty of saw dust along with small bits of off cuts. They’ll block the way unless you clean these particles periodically. It is advisable to stop every short while to clean the dust and be sure that it is very clear and prepared for proper use.
Step 08: Pay Attention and Keep Your Hands Away From the Blade:
The last using tip is just about the most important, focus on what you are doing. Many individuals seem to forget that a miter saw can be extremely dangerous and because of this, they don’t give consideration just how that they will need to. Monitor what you’re always doing. Keep your hands away from the best miter saw blade and ensure that you follow the safety rules.
Safety Tips:
Follow these basic safety tips whenever using a miter saw:
1. Eye along with ear protection is a must whenever operating a miter saw.
2. Don’t use gloves, loose clothes, jewelry, or any protruding items when using a miter saw.
3. All of the guards should be set up in the proper place. If a safeguard seems slow to come back to its normal position or even hangs up, adjust or repair it quickly.
4. Unplug the miter saw when making fixes or adjusting blades plus guards.
5. Fingers and hands have to be kept free from the blade at least six inches
6. Clean the low guard often to assist with visibility plus movement.
7. Only use the suggested blade size.
8. Frequently check and fasten the blade plus the blade-attachment mechanism.
9. Make sure that the blade and its related washers and nails are properly placed and guaranteed within the saw’s arbor.
10. To avoid shedding control or putting hands on the sharp edge route, keep or perhaps clamp all materials safely against the fence whenever cutting.
11. Long materials ought to be supported perfectly elevation as the saw table.
12. After finishing a cut, release the activate switch plus enable the blade to come quickly to a whole stop. Next raise the saw blade from the work piece. If the moving blade remains in the cutting region after cutting is completed, injury can derive from unintended contact.
Conclusion:
A good power miter saw is a tool that each homeowner can consider for his woodworking tasks. In this article, we have provided the essential tips and techniques for utilizing the best miter saw. Nevertheless, you want to ensure that you are aware of the techniques for your unique saw. So read the above tips and techniques on how to use a miter saw attentively and we think it must be supportive of you.
