Your creative business needs the best heat transfer printer to produce high-quality printing t-shirts. There is no short cut to this. Therefore, if you decide to invest in a heat transfer printer, you should consider various factors because you may have to use it a lot. Whether you have enough budget or you are working on a limited budget, you can find a heat transfer printer that will fit your budget. This post will look at various factors you should consider before buying a heat transfer printer.
Considerations for the best heat transfer printer
The heat transfer printer that is best for you depends on what you want to use it for. While the basics of heat transfer printers are usually the same, you still need to consider other factors before purchasing them. Below are some of the factors you should think of when buying a heat transfer printer:
The manufacturer
This is possibly one of the most important factors you should consider because having a broken heat transfer printer will not help your business. Therefore, you need to have enough back up from the manufacturer to get the printer running again quickly.
Knowing where you’re purchasing the heat transfer printer will help you have peace of mind and confidence in your purchase. Simply put, you should check if the supplier has reliable customer service and technical support, and find out if they provide online troubleshooting resources.
The time factor
Time is important in a heat transfer application, meaning having an accurate timer is essential. A timer on the heat transfer printer might also save you a lot of problems in the long run. Hence, you should check if the application has digital or analog readings for the time, pressure, and temperature readings. Most people prefer having digital readings because they are more accurate.
Other factors to look into include if the timer resets automatically and whether the printer is programmable and opens automatically after each application. A heat transfer printer that opens automatically when the time is up can allow you to multitask if you have busy operations.
Temperature
To have a long-lasting heat transfer application, you need to have an accurate temperature. Therefore, consider its temperature gauge, whether it has a bimetallic thermometer or an RTD probe, and the spacing out of the heating elements inside the heat transfer heater. Remember that printers that have heating elements spaced less than 2 inches apart cannot give cold spots because they produce edge to edge heat.
Pressure
This is another key factor if you want to have the correct applied heat transfer. You should have the right pressure for your t-shirt materials or any other materials. Here is the deal, you need to determine if the heat transfer printer will apply pressure evenly with the right strength.
Heat transfer printers can have digital or analog readings, but digital reading gives a more accurate pressure reading. Besides, the printers with over the center pressure adjustment tend to provide more evenly applied pressure on your heat transfer printer.
