What are the four points of choosing a fiber cleaver?
Four points to choose fiber metal fiber laser cutting machine
Laser lens:
Generally, the better the laser lens, the more laser light is reflected and the smaller the laser loss. This will help improve the photoelectric conversion rate of the laser tube cutting machine. There are two types of lenses: imported lenses and domestic lenses. Domestic lenses are divided into imported materials and domestic materials. The price gap is huge, and the use effect and service life are also very different.
Operating software?
The operating software used by the metal fiber laser cutting machine is the brain of the entire device, which controls the laser generator and the vibrating lens. The light output speed of the laser generator is fast and slow. High and low optical power are controlled by software. The vibration speed and angle of the vibrating lens, and the direction of the light are controlled by the operating software. Therefore, the operating software plays an important role in the equipment. A good accessory must also be coordinated by a good software to play the greatest role.
Laser vibrating mirror?
The speed and accuracy of the metal fiber laser cutting machine depend on the speed and accuracy of the vibrating lens. The temperature of the vibrating lens will be generated under working conditions. With the extension of working hours, the temperature will be higher. If the vibrating lens can not work for a long time, it will cause accuracy deviation and speed will decrease. Vibrating lens is currently the accessory with the highest failure rate of laser marking machines, so choosing high-quality vibrating lens is very important to the stability of the equipment.
Laser generator?
Since the laser generator is the core part of the entire laser marking machine, its quality determines the quality of the metal fiber laser cutting machine. Generally speaking, imported lasers are better, with good beam quality and high electro-optical conversion rate. Domestic lasers are slightly inferior, but domestic lasers can also meet the needs of any industry. With the rapid development of the laser industry, the domestic technology of the metal fiber laser cutting machine is becoming more and more mature in terms of application.
The current technology level is close to the international level, and the service life exceeds 3-4 years. You can also buy with confidence. Although imported laser generators will produce finer effects, they are expensive and troublesome to maintain. If there is a malfunction, you need to send it abroad. The customs declaration procedures are cumbersome and the maintenance period is long; relatively speaking, the domestic laser generator can basically meet everyone’s requirements, and the cost is low. Maintenance is simple and quick.
