Drill press tool is also commonly referred as the drilling machine which are used to bore holes by constant rotary action. It is usually utilized to drill holes in hard substances. There is a wide variety of drill tools available which ranges in cost, size and types. However, the all operate in the same manner.
A drill press tool consists typically of these parts:
- Switch
- Variable speed control
- Motor
- Column
- Pilot feed lever
- Base
Parts of the drill press
The hand drill press tool consists of motor situated at the rear of the machine driving a pulley connected to the spindle that rotates the bits. It even has stepped pulleys to adjust on speed. It is fitted with special bits that cut material in the workshop.
To pierce smaller holes, awl can be used. The drill press has constantly evolved over the years form easier to more complex types.
How can we keep care of the drill press tools?
There are many ways to maintain a drill press tool and keep its good care. It is imperative to keep the machine lubricated since it consists of a number of moving parts and a lot of heat is generated during its operation. The user must follow the manufacturer’s instruction manual when lubricating the tool. The machines must be cleaned after usage. Chips must be removed when cleaning to prevent damaging any moving parts.
Care must be taken when operating the machine. It is important to avoid overworking with the electric motor which may lead into damage.
However, special care must be taken when operating in adverse conditions to prevent potential harm. For example, when working in extremely dusty conditions, it must be operated at its slowest possible speed to prevent wearing of the moving parts. Users must avoid striking with hard tools when extremely hot metal is brittle.
Personal safety
Personal safety must also be taken into account when using the drill press. They are pretty unsafe equipment if not used in the right way. Safety procedures must be followed and such measures must be taken to ensure a protected environment. Here are some of the steps every user must follow:
- Never adjust the machine parts while it is running.
- Loose clothes must not be used as it may result in an accident.
- Guards must be locked and kept in place when operating.
- Protection must be worn and proper clothing must be kept on when operating drill machines.
- Chuck keys and wrenches must be removed before operation.
Where is it used?
Drill press tool is one of the most used equipment in any workshop. From engineers to carpenters and plumbers to electrician, every technical person is in need of this imperative tool. Because of its immense usage, there is a wide number of drill presses available in the market to use.
Conclusion
Here were the basics of drill press tool. Getting them over would provide insights into the right options and how to choose them.
