If you decide to stain or polish concrete floor, there are many factors that you should consider. The level of expertise required for staining the floor will determine if you will do it yourself or hire a pro. If you are looking to have an elegantly looking space, hiring a contractor can help meet your expectations. Remember that staining is a permanent mark that doesn’t require trial and error. If you are not used to it, you better invest in some skilled personnel.
However, suppose you intend to perform simpler activities like adding color or some imperfections to your floor. In that case, you can do it yourself without necessarily needing a pro. There are several approaches to take when coloring or staining a concrete floor. The most key thing to consider is choosing the right material and tools necessary in the process.
You should know that with floor staining, there is no good back once the process begins. It has limited second chances after applying a stain or a coloring agent. Therefore be sure to start with small projects if at all you want to do it yourself.
How to Prepare For DIY on Floor Staining or Epoxy Installation
To successfully execute a fantastic job on floor staining by yourself, you need to do proper preparation. The reason behind adequate preparation is to minimize errors on the floor. Therefore make sure to understand every aspect to make it easy for you to do it yourself. Follow these preparation guidelines before commencing to execute your project.
- Learn the basics: It would be best to understand all basics involved in staining or epoxy application. Have a clue how to prepare the concrete surface, install epoxy, or apply the concrete stain. After that, you need to understand the purpose of sealing the floor after working on it.
- Clear expectation: Set realistic expectations about what you want to achieve with epoxy coatings or concrete stains. When you are stain, you should aim to give your floor a facelift. When you decide to install metallic epoxy, consider your room’s color and choose an epoxy pigment to improve your deco.
- Make sure you understand how you use the application tools. Invest in personal protective wear when you are working with acid-based stains or metallic epoxy coating.
- Identify hazards: Beware of the potential health hazards associated with chemical application and the possible safety precautions to take
The Simplest DIY Stain Types to Use
There two main sorts of stains to choose from when it comes to staining your space by yourself. These main types range from acid-based to water-based, both of which offer an irreversible coloring. However, they differ in terms of how to use them.
While many acid stains are popular, they can be difficult to DIY. Acid stains installation requires special e equipment and additional activities like neutralization to stop further reactions. It would work better if you choose water-based stains, which are also available in a wide range of tones. They are more DIY-friendly than acid-based because they are nontoxic and also don’t necessarily need rinsing.
For the stains to achieve full-color saturation, you must soak them into the concrete. Avoid as much as possible the surfaces covered by dust, grease, glues, layers, curing membranes, and also sealants. This debris can inhibit tarnish infiltration.
The Final Thought on DIY Concrete Stain Application
The bottom line here is that if you are determined to tackle a DIY project, basic stained or epoxy concrete would be your next endeavor. Begin by doing surface preparation tasks and ensure you have all the right tools you need. If well prepared with Best Garage Floor Epoxy Coating, staining concrete can surprise you to do-it-yourselfer with more than what you could imagine.
With that in mind, if you have a small surface area, and you intend to apply a single color, perhaps, then follow the above DIY instruction, the results will be amazing. However, it would be advisable to the situation and quickly tell if you want to tackle or need a professional contractor intervention. If you do not have enough experience, tick to basics and leave alone complex stained concrete design to an expert.
