Worried about the constant problems with your cupboards and the cupboards doors? Well, equipping yourself with the best DIY solutions could be the trick that you have been missing all along. If you have cupboards in your house then you must have experienced some few issues with the cupboard doors, the most common problems faced by many people are, the cupboard doors refusing to open or shutting with a big bang. Sadly enough, some people can say that they have gotten used to dealing with the problems that arise with cupboard doors after a period of usage. However, this doesn’t solve the situation, it puts your cupboard at a higher risk of being damaged, the best solution for dealing with this problem is having your cabinets repaired.
Having a cabinet or a cupboard in the house that is nonfunctional is an inconvenience to a lot of things. Not only can you not use it, but it will also prove to be a hazard in the long run if not repaired on time. If you fail to repair your cupboards, then be ready to deal with small accidents like pinched fingers from your family members, not to mention there lies the risk of more serious accidents like the cabinet falling. Below we want to look at some of the common cupboard problems and how to fix them.
- Drawers sticking Out
When the drawer sticks out, it will definitely affect how your cupboard opens. How to fix a sticky drawer happens to be one of the easiest DIY repair projects for your cupboards. Most of the times, a sticky drawer is caused by particles that are stuck in the cupboard tracks or dryness of the tracks. Remove the drawer then carefully clean the cupboard tracks and get rid of any substance or particles present. After that, dry the tracks then apply some lubricant. After doing this, you can fix the drawers back, try opening and closing the drawer. If the problem persists then probably the slides are damaged and need to be replaced.
- The Cupboard doors not closing
Your cupboard doors don’t stay closed could be caused by a loose screw. Carefully check all the screws that are on the cupboard doors, to see which ones are causing the doors to swing open frequently. After tightening the loose screw, you should look at the hinges and make sure that they are also secure. If these two tricks don’t work, then your cupboard doors are not aligned properly. Get an expert to come and check the levels of your cupboard and cupboard doors and determine if they need realignment.
- The cupboard hinges not staying in place
This only happens when the screw holes in your cupboards have been stripped. The good thing about this problem is that there are several DIY solutions that you can use to solve this problem. You can start by trying to remove the hardware. Using matchsticks or wooden toothpicks pack the space then apply glue to make sure they are in place. Then using a utility knife cut off the excess space. After doing this then you can use one of the many DIY videos available online to replace the hardware on your cupboard. Just stick to the simple procedure of replacing the cupboard hardware. The other solution would be installing repair plates on cupboards. You can also replace the normal screws in your cupboard with the expandable anchors. The last solution to this would be to adjust the height of the hinges. This is done by relocating the hinges about approximately an inch from the original spot.
- The finish of the cupboard is worn out
Minor scrapes with a wooden fill stick can help. This will help in matching the color of your cupboards to that of the finish. However, if you are dealing with a very severe case, then a more drastic solution will be needed. Then you will need to sand your wooden cupboards, and then re-stained to get rid of the scratches and nicks. You also have the option of having the surface of the cabinet repainted to a color that will blend more with the finishes. Look for solutions online that will be able to offer you with painting, de-glossing and even glazing your cupboards.
- Banging cupboard doors
One of the most common problems many people have to deal with when it comes to cupboards. In the market, you will find drawers and doors bumpers that are easy to use. These particular ones are designed to have a protection strip that is “peel and stick.” If you want a grip that is extra secure, then you can opt to have these bumpers screwed in place. When shopping for these cupboard door bumpers, it is essential to pick one that matches the cupboard doors you have in your home. Most bumpers are picked from their thickness.
- Saggy drawer bottoms
Wood glue is known to be the best solution when you have saggy drawers. Just cut to shape a sheet of plywood that is no more than ¼ an inch then fix it on the bottom of the drawer using wood glue. The plywood will act as a temporary reinforcement. However, you should be careful about the weight of the things you will be storing in your drawer. Heavier things will worsen the saggy drawers.
- Ugly looking cupboard hardware
Do your cupboards give your kitchen or house an ugly look? The first solution that we all run to would be to organize an extreme makeover of the cupboards and have them replaced. However also this can be dealt with by adopting the best care and maintenance routine for your cupboards. If you take good care of your cupboards, then they will have an eye-catching look. Frequently cleaning the hardware then buffing it with some polish will not only improve the look of your hardware but also increase its lifespan. You can also unscrew the hardware then use spray paint, to repaint the cupboards. But if you have enough cash and time, then you can have the whole hardware replaced and get a new set of cupboards that will give your kitchen a look you want.
Related Posts
Loves home. I am here to provide how to make your home a much better place. 🙂 Blogging about HomeDecor, Home Improvements and more.