Being a DIY has its own pros and cons. If you look at the positive sides, you can save money that you normally spend on professionals and you also get to design your furniture the way you want. However, on the negative side, you have to give it a lot of time, which you could have spent on something more important.
Nonetheless, if you are a DIYer, you will probably have your own miter saw that you use more often than any other cutting tool and if you don’t you can find a great one at MiterSawBuzz.com – Reviews & Guides.
However, using a miter saw is not as simple as you may think. It takes some level of experience and practice.
Tips and Tricks for Using Your Miter Saw Efficiently
Here are some useful and handy tips and tricks for using a miter saw more efficiently. These tips will be useful for any DIYer out there.
-
- Change the Saw Blade That Comes with the Saw: It is needless to say that blades with more teeth are important when it comes to cutting crisper and cleaner cuts. On the other hand, blades with lesser number of teeth normally make chippy and rough cuts. Thus, if you are interested at making cleaner cuts to make your DIY furniture, it will be a good idea to change the blade of your miter saw that you normally get with the saw and get one which has more teeth.
-
- Forget the Line: If you are a DIYer, then it is very important for you to leave the line or forget the line. The sole reason behind this is that it will allow you to fine tune any cut if you feel the need of the board to be slightly shorter.
-
- Micro Adjustments Can Be made With the Blade: Sometimes, you may have to take off just a slight or micro amount in order to adjust the length of the board. You will need the blade for this purpose in order to get the desired results.
-
- Choose A Stop for Any Repetitive Cuts: There may be projects which may require repetitive cuts to be made with the miter saw. Most of you probably waste your time measuring each cut repeatedly. Instead, you can measure just once and use a stop, which is a piece of scrap wood that you clamp to your miter saw. This will save a lot of time and effort.
-
- Allow the Blade to Stop Completely: Always remember to allow the blade of your miter saw to come to a full stop after you have lowered it in order to make a cut and before raising it back up. If you do not do this, the blade with cut in both down and upswing. The end result will be a change in the length of the cut.
-
- Trim the Ends of The Wood: It will be a good idea to trim the wood that you get from the factory before starting your projects. As you all know, wood from the factories are never perfect in terms of square shape.
-
- Fine Tune the Saw: Check the saw for accuracy every time you buy a new one. Although these are set at the factory, the accuracy may alter during transportation.
